GW Instek PSU 300-5 - Commands:Display[:Window]:Text:clear; Display:Display:menu[:Name]

PSU Series Programming Manual
76
Display Commands
:DISPlay:MENU[:NAME] .................................................. 76
:DISPlay[:WINDow]:TEXT:CLEar .................................. 76
:DISPlay[:WINDow]:TEXT[:DATA] ............................... 77
:DISPlay:BLINk .................................................................... 77
:DISPlay:MENU[:NAME]
Set
Query
Description
The DISPlay MENU command selects a screen
menu or queries the current screen menu.
Syntax
Query Sytax
:DISPlay:MENU[:NAME] <NR1>
:DISPlay:MENU[:NAME]?
Parameter/
Return parameter
<NR1>
Description
0
Measure voltage & current
1~2
Not Used
3
Set Menu
4
OVP / OCP Menu
5~99
Not Used.
100~199
F-00~99 Menu.
200~229
F100~F129 Menu.
Example
DISP:MENU:NAME 0
Sets the display to the Voltage/Current display
screen.
:DISPlay[:WINDow]:TEXT:CLEar
Set
Description
Clears the text on the main screen from
the :DISPlay[:WINDow]:TEXT[:DATA] command.
Syntax
:DISPlay[:WINDow]:TEXT:CLEar