GW Instek PSU 300-5 - System:communicate:serial:multidrop:Control; System:communicate:usb:front:state; System:communicate:usb:rear:mode

PSU Series Programming Manual
126
:SYSTem:COMMunicate:SERial:MULTidrop
:CONTrol
Query
Description
Queries the Multi-Drop Control state.
Query Syntax
SYST:COMM:SER:MULT:CONT?
Return parameter
0
<NR1>Disable
1
<NR1>Master
2
<NR1>Slave
:SYSTem:COMMunicate:USB:FRONt:STATe
Query
Description
Queries the front panel USB-A port state.
Query Syntax
:SYSTem:COMMunicate:USB:FRONt:STATe?
Return parameter
0
<NR1>Absent
1
<NR1>Mass Storage
:SYSTem:COMMunicate:USB:REAR:MODE
Set
Query
Description
Sets or queries the speed of the rear panel USB B
port.
Note
The setting will only be valid after the power has been
cycled.
Syntax
:SYSTem:COMMunicate:USB:REAR:MODE
{<NR1>|DISable|AUTO|FULL}
Query Syntax
:SYSTem:COMMunicate:USB:REAR:MODE?
Parameter
0 | DISable
Disable
1 | AUTO
Auto detect speed
2 | FULL
Full speed
Return parameter
<NR1>
0
Disable