GW Instek PSU 300-5 - Analog Control Connector Overview

PSU Series Programming Manual
118
Note
The setting will only be valid after the power has been
cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:ENABle {<bool>
|OFF|ON,GPIB|USB|LAN|SOCKets|WEB|SERial}
:SYSTem:COMMunicate:ENABle?
{GPIB|USB|LAN|SOCKets|WEB|SERial}
Parameter 1
OFF | 0
Disables the selected interface.
ON | 1
Enables the selected interface.
Parameter 2
GPIB
Select GPIB
USB
Select USB
LAN
Select LAN
SOCKets
Select Sockets
WEB
Select the web server
SERial
Selected Serial (UART)
Return Parameter
<bool>
Returns the status of the selected
mode.
Example
SYST:COMM:ENAB 1,USB
SYST:REB
Turns the USB interface on and reboot the unit to
active the setting.
Query Example
SYST:COMM:ENAB? USB
1
Queries the USB state, returns 1 (USB is on).
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
Set
Query
Description
Sets or queries the GPIB address.
Note
The setting will only be valid after the power has been
cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
<NR1>
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?