h/p/cosmos pluto - Page 158

optional settings: administrator options
file: n:\article\cos14310m5-v1_08hpc-en\20150130_cos14310m5-v1.08hpc-en_instructions_for_use_h-p-cosmos_treadmill.doc
© 2015 h/p/cosmos sports & medical gmbh author: fh email@h-p-cosmos.com created 30.01.2015 printed 30.01.2015 page: 158 of 216
OP 37
Interval for service message TSC
(time-dependent)
for technical safety control E.02
“HELP"
12 months
0 (OFF) = no supervision
(from firware version v1.07.x on)
0 … 48 month
OP 38
Service Interval (distance-
dependent)
"E 02" "HELP"
5,000 km (treadmill)
500 km (ladder ergometer)
0 (OFF) = no supervision
(from firware version v1.07.x on)
1,000 ... 9,999 km (treadmill)
100... 5,000 km (ladder ergometer)
OP 39
Elevation: display as set point or
true value
1 (true value)
0 = set point
1 = true value
OP 40
Speed: display as set point or true
value
1 (true value)
0 = set point
1 = true value
OP 41
Elevation control after STOP
0 (elevation maintains)
0 = elevation maintains
1 = elevation gets down to 0 %
OP 46
Display and setting of elevation for
ladder ergometer
75 (degree)
0 … 180 degree
OP 47
Reset of oil- and service interval
OP 48
Running belt speed at maximum
frequency inverter speed
depending on the device type,
OP 03
(depending on the device type,
OP 03) 1.00 … 99.99 km/h
OP 49
Type of FI control
RS-485
analogue, RS-485
OP 51
Error statistics of the digital FI-
control
n.a.
0 to 9999 per type of error
OP 89
System for elevation measurement
(depending on the device
type; OP 03)
(depending on the device type;
OP 03)
OP 90
Load or save default setting
n.a.
n.a.
OP 91
Total time of operation MCU
(incl. stand by)
n.a.
0 ... 1.193.046 h
OP 92
Total distance
n.a.
0 ... 4.294.976 km
OP 93
Total time of operation (incl. stand-
by)
n.a.
0 ... 1.193.046 h
OP 94
Total time of use (motor + belt)
n.a.
0 ... 1.193.046 h
OP 95
MCU serial number
n.a.
0000 0000 to 9999 9999
OP 98
Setting for limitation of time of use
n.a.
n.a.
OP 99
Test profile 99 for endurance testing
in the factory / service
0 = test 99 de-activated
0 = test profile 99 de-activated
1 = test profile 99 activated