117
Figure 167 Screen for logical drives in Failed state
Setting the number of OS bootable drives in Legacy BIOS
mode
Perform this task to set the number of OS bootable drives in UEFI or Legacy mode, in the range of 0
to 8. This feature is available only in Legacy BIOS mode.
OS bootable drives is set to 0 in Legacy BIOS mode, the OS will start up properly
,
and the OS boot option are not visible.
1. On the storage controller configuration screen as shown in Figure 168, select Set Bootable
Device(s) for Legacy Boot Mode and press Enter.
To Next Page
Loading...
