4
RAID
configuration
Create RAID Configuration Create RAIDs.
Delete RAID Configuration Delete RAIDs.
Rebuild RAID Configuration Rebuild RAIDs.
Namespace*: Memory space of an NVMe M.2 SSD that is logically divided. Namespaces are
independent of each other and can be formatted or encrypted independently. The
RAID-MARVELL-SANTACRUZ-LP-2i storage controller does not support namespaces.
Configuring a RAID array
1. Access the storage controller configuration screen, select Create RAID Configuration, and
press Enter.
Figure 4 Storage controller configuration screen
2. Set the state of the two member drives to Enabled, select Goto RAID Config, and press
Enter.
Figure 5 Selecting member drives
To Next Page
Loading...
