4
Accessing the storage controller configuration screen
Access the BIOS. Press Delete, Esc, or F2 as prompted during server POST to open the BIOS
setup screen as shown in Figure 1. For some servers, the Front Page screen opens, and you must
select Device Management before proceeding to the next step.
For how to navigate screens and modify settings, see the operation instructions at the lower right
corner.
Figure 1 BIOS setup screen
Switching the operating mode
If RAID arrays have been created, delete all the RAID arrays before you switch the mode.
To switch the operating mode:
1. On the storage controller configuration screen as shown in Figure 2, select Configure
Controller Settings and press Enter.
To Next Page
Loading...
Need help?
General
