4-8
View
System view
Default Level
2: System level
Parameters
None
Description
Use the gratuitous-arp-learning enable command to enable the gratuitous ARP packet learning
function.
Use the undo gratuitous-arp-learning enable command to disable the function.
By default, the function is enabled.
With this function enabled, an AP receiving a gratuitous ARP packet can add the source IP and MAC
addresses carried in the packet to its own dynamic ARP table if it finds no ARP entry in the cache
corresponding to the source IP address of the ARP packet exists; if the corresponding ARP entry exists
in the cache, the AP updates the ARP entry regardless of whether this function is enabled.
Examples
# Enable the gratuitous ARP packet learning function.
<Sysname> system-view
[Sysname] gratuitous-arp-learning enable
To Next Page
Loading...
