5-12
7468-6572-6e65-7430-
2f31
--- total 2 entry ---
Table 5-4 display dhcp server ip-in-use command output description
Field Description
Pool utilization
Utilization rate of a DHCP address pool
z When the binding information of all DHCP address pools is
displayed, this field displays the total utilization rate of all DHCP
address pools.
z When the binding information of a specific DHCP address pool
is displayed, this field displays the utilization rate of the DHCP
address pool.
z When the binding information of a specific IP address is
displayed, this field is not displayed.
IP address Bound IP address
Client-identifier/Hardware address Client’s ID or MAC of the binding
Lease expiration
Lease expiration time, which can be
z Specific time (May 1 2009 14:02:49 in this example): Time
when the lease expires.
z NOT Used: The IP address of the static binding has not been
assigned to the specific client.
z Unlimited: Infinite lease expiration time.
Type
Binding types, including Manual, Auto:OFFERED and
Auto:COMMITTED.
z Manual: Static binding
z Auto:OFFERED: The binding sent in the DHCP-OFFER
message from the server to the client.
z Auto:COMMITTED: The binding sent in the DHCP-ACK
message from the server to the client.
display dhcp server statistics
Syntax
display dhcp server statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dhcp server statistics command to display the statistics of the DHCP server.
Related commands: reset dhcp server statistics.
Examples
# Display the statistics on the DHCP server.
<Sysname> display dhcp server statistics
To Next Page
Loading...
