H3C WA2610E-AGN - Reset Dns Dynamic-Host

7-7
You can configure only one mapping for a host name. A mapping newly configured for the host name
will overwrite the previous one if there is any.
Related commands: display ip host.
Examples
# Map the IP address 10.110.0.1 to the host name aaa.
<Sysname> system-view
[Sysname] ip host aaa 10.110.0.1
reset dns dynamic-host
Syntax
reset dns dynamic-host
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset dns dynamic-host command to clear the dynamic IPv4 domain name resolution
information.
Related commands: display dns dynamic-host.
Examples
# Clear the dynamic IPv4 domain name resolution information.
<Sysname> reset dns dynamic-host