11-4
Parameters
None
Description
Use the display ipv6 dhcp duid command to display the DUID of the local AP.
Examples
# Display the DUID of the device.
<Sysname> display ipv6 dhcp duid
The DUID of this device: 0003-0001-00e0-fc00-5552.
reset ipv6 dhcp client statistics
Syntax
reset ipv6 dhcp client statistics [ interface interface-type interface-number ]
View
User view
Default Level
1: Monitor level
Parameters
interface interface-type interface-number: Clears DHCPv6 client statistics of a specified interface.
Description
Use the reset ipv6 dhcp client statistics command to clear DHCPv6 client statistics.
With no parameters specified, DHCPv6 client statistics of all the interfaces will be cleared.
After this command is executed, the packets statistics is displayed as 0 when you use the display ipv6
dhcp client statistics command.
Related commands: display ipv6 dhcp client statistics.
Examples
# Clear DHCPv6 client statistics of all the interfaces.
<Sysname> reset ipv6 dhcp client statistics
To Next Page
Loading...
