H3C WA2610E-AGN - 7 Ipv4 DNS Configuration Commands; Display Dns Domain; Dns Domain ······································································································································7

7-1
z Support of the H3C WA series WLAN access points (APs) for commands may vary by AP model.
For more information, see Feature Matrix.
z The interface types and the number of interfaces vary by AP model.
z The models listed in this document are not applicable to all regions. Please consult your local sales
office for the models applicable to your region.
7 IPv4 DNS Configuration Commands
IPv4 DNS Configuration Commands
display dns domain
Syntax
display dns domain [ dynamic ]
View
Any view
Default Level
1: Monitor level
Parameters
dynamic: Displays the domain name suffixes dynamically obtained through DHCP or other protocols.
Description
Use the display dns domain command to display the domain name suffixes.
Related commands: dns domain.
Examples
# Display domain name suffixes.
<Sysname> display dns domain
Type:
D:Dynamic S:Static
No. Type Domain-name
1 S com
Table 7-1 display dns domain command output description
Field Description
No Sequence number