H3C WA2610E-AGN - Dns Resolve; Dns Server

7-5
z The domain name suffix configured with the dns domain command is applicable to both IPv4 DNS
and IPv6 DNS.
z You can configure a maximum of 10 domain name suffixes.
Related commands: display dns domain.
Examples
# Configure com as a DNS suffix.
<Sysname> system-view
[Sysname] dns domain com
dns resolve
Syntax
dns resolve
undo dns resolve
View
System view
Default Level
2: System level
Parameters
None
Description
Use the dns resolve command to enable dynamic domain name resolution.
Use the undo dns resolve command to disable dynamic domain name resolution.
Dynamic domain name resolution is disabled by default.
Note that this command is applicable to both IPv4 DNS and IPv6 DNS.
Examples
# Enable dynamic domain name resolution.
<Sysname> system-view
[Sysname] dns resolve
dns server
Syntax
In system view:
dns server ip-address
undo dns server [ ip-address ]
In interface view:
dns server ip-address
undo dns server ip-address
View
System view, interface view