8-1
8 IPv6 DNS Configuration Commands
Support for the IPv6 DNS configuration commands depends on the AP model.
IPv6 DNS Configuration Commands
display dns ipv6 dynamic-host
Syntax
display dns ipv6 dynamic-host
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display dns ipv6 dynamic-host command to display the information of the dynamic IPv6
domain name cache, including the host name, IPv6 address, and TTL of the DNS entries.
You can use the reset dns ipv6 dynamic-host command to clear all the information of the dynamic
IPv6 domain name cache.
Examples
# Display the information of the dynamic IPv6 domain name cache.
<Sysname> display dns ipv6 dynamic-host
No. Host IPv6 Address TTL
1 aaa 2001::2 6
Table 8-1 display dns ipv6 dynamic-host command output description
Field Description
No. Sequence number
Host Host name
IPv6 Address IPv6 address of the host
TTL Time within which an entry can be cached, in seconds
To Next Page
Loading...
