H3C WA2610E-AGN - Dhcp Server Relay Information Enable; Display Dhcp Server Conflict

5-8
<Sysname> system-view
[Sysname] dhcp server ping timeout 1000
dhcp server relay information enable
Syntax
dhcp server relay information enable
undo dhcp server relay information enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the dhcp server relay information enable command to enable the DHCP server to handle Option
82.
Use the undo dhcp server relay information enable command to configure the DHCP server to
ignore Option 82.
By default, the DHCP server handles Option 82.
Examples
# Configure the DHCP server to ignore Option 82.
<Sysname> system-view
[Sysname] undo dhcp server relay information enable
display dhcp server conflict
Syntax
display dhcp server conflict { all | ip ip-address }
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays information about all IP address conflicts.
ip-address: Displays conflict information for the IP address.
Description
Use the display dhcp server conflict command to display information about IP address conflicts.
Related commands: reset dhcp server conflict.
Examples
# Display information about all IP address conflicts.