Hach BioTector B7000i User Manual

Page 15
1.5.4 Sample Stream Precautions
The user is responsible to establish the potential hazard associated with each sample stream. Necessary
precautions must be taken, to avoid physical contact with any harmful sample stream, which may contain
chemical or biological hazards.
System components and their composition, which come in contact with the sample liquid and possible volatile
gases from the sample, are tabulated in table 1 below. If there are suspected compatibility issues between the
sample stream and BioTector components, please contact the manufacturer or the distributor.
Table 1 System components and their composition
Component
Material
Tubing
PFA (Per-fluoro-alkoxy)
Fittings
PFA (Per-fluoro-alkoxy)
Stainless Steel (SS-316)
PVDF (Poly-vinylidene-flouride)
Pump Tubing
EMPP (Elastomer-modified-poly-propylene)
Connectors
PP (Poly-propylene)
Connector & Valve Tubing
EMPP (Elastomer-modified poly-propylene)
Viton
Sample (ARS) Valve
PEEK (Poly-ether-ether-ketone)
PVDF (Poly-vinylidene-flouride)
Stainless Steel (SS-316)
Reactor
Hastelloy (C-276)
Stainless Steel (SS-316)
PFA (Per-fluoro-alkoxy)
PTFE (Poly-tetra-fluoro-ethylene)
Borosilicate Glass
Kalrez
Valve Seals
Kalrez
Viton
Oxidized Sample Catch-pot/Cleaning Vessel
Borosilicate Glass
NDIR CO
2
Analyzer
Hastelloy (C-276)
Stainless Steel (SS-316)
NDIR CO
2
Analyzer Lens
Sapphire

Hach BioTector B7000i Specifications

General

Power Requirements	100 - 240 VAC, 50/60 Hz
Parameter	TOC
Sample Type	Water
Analysis Method	Oxidation
Measurement Principle	UV persulfate oxidation with NDIR detection
Calibration	Automatic
Cleaning Interval	Programmable
Communication	4-20 mA, Modbus, Ethernet, USB
Display	LCD
Enclosure Material	Stainless Steel
Operating Temperature	5-40°C
Sample Temperature	5-40°C
Weight	25 kg