116
Expanded programs
6.7.1 Instrument Information
1. Press Instrument Information in the "System Check" menu.
2. The model, serial number and software version are
displayed.
6.7.2 Update the instrument software
To obtain the software for the update from the Internet at
www.hach.com:
1. Go to http://www.hach.com.
2. Select the country.
3. Enter DR 6000 in the Search field.
4. Navigate to the corresponding file for download.
5. Save the file to a USB storage device or PC.
6. Tap on Instrument Update in the "System Checks" menu.
7. Plug the USB storage device into the USB port (USB A) of
the device, refer to section 3.5, page 20.
8. Press OK. The link is established automatically and the
software is updated.
9. Press OK to return to the "System Check" menu.
Note: After the instrument update, a prompt to restart the instrument will
be displayed.
6.7.3 Optical Checks
1. Press Optical Checks in the "System Check" menu.
The "Optical Checks" menu contains programs for checking the
wavelength accuracy, stray light and photometric accuracy.
An optional test filter set (Verification Kit) Section 9, Page 143
containing six precision glass filters, target values and
instructions is available as an aid for carrying out comprehensive
in-house instrument checks.
6.7.3.1 Verification kit
The Verification Kit (refer to Section 9, Page 143) is designed for
periodic monitoring of scattered light, photometric accuracy and
the wavelength accuracy of the spectrophotometers.
To Next Page
Loading...
