38
Standard programs
5.2.7.1 Printer setup
1. Press Printer.
2. Press Setup to display the Printer Setup screen.
Printer Setup:
• Resolution: Font size
• Paper: Paper size
• Network Printer: Automatic printer search or fixed input via IP
address.
Note: If an optional Thermal Printer is connected, the function "Auto
Send" on/off is available.
3. Press Resolution to select the print quality.
For selection are
• 100 dpi,
• 150 dpi and
• 300 dpi.
4. Press OK to confirm the entry.
Note: Press OK again to return to the "Instrument Setup" menu.
5. Press Paper to select the paper size.
For selection are
• Letter,
• Monarch,
• Executive,
• A4.
6. Press OK to confirm the entry.
Note: Press OK again to return to the "Instrument Setup" menu.
When you have connected the DR 6000 to your local network
(refer to section 5.2.7.4) you can print out your data on all
network printers.
To Next Page
Loading...
