Hach DR 6000 - Instrument Backup and Restore

127
Expanded programs
11. Press Options to set further functions:
New: Defines an additional pipette.
Delete: Deletes a defined pipette.
Edit: Modifies settings for a defined pipette.
Reminder: Defines a reminder interval to determine when
the user is prompted to return to this AQA measurement.
History: List of all previously performed pipette checks.
12. Press Close to exit the options menu.
6.7.5 Instrument backup
Prior to the next service date, the "Instrument Backup" offers
the opportunity to store all programs, measurement data, user
IDs, passwords, as well as all adjustable data on a USB stick.
1. Press Instrument Backup in the "System Check" menu.
2. Insert the USB stick (refer to section 3.5, page 20).
3. Press Store to start a Backup.
If the file was stored, the message "Instrument Backup is stored"
will be displayed.
4. Press OK to return to the "System Check" menu.
Restore backup data:
Note: All current data will be overwritten when restoring the Backup file!
1. Press Instrument Backup in the "System Check" menu.
2. Insert the USB stick with the backup (refer to section 3.5,
page 20).
3. Press Restore to pass back the data.