58
Standard programs
5.4.1 Select a saved test/method; entering user-specific basic data
1. Press Stored Programs in the Main Menu to view an
alphabetical list of stored programs with program numbers.
The "Stored Programs" list will appear.
2. Highlight the required test.
Note: Select the program by name or scroll through the list using the
arrow keys. Highlight the program or press Select by No. to search
for a specific program number. Press OK to confirm.
3. Press Start to run the program. The respective
measurement window is displayed.
Note: All corresponding data (wavelength, factors and constants) is
already preset.
4. Follow the chemical procedural instructions. The procedural
instructions are also on the CD included in the scope of
delivery.
Note: To display the procedural instructions in the display, press the
info icon. This option is not available for all tests.
5.4.2 Stored programs options
1. Press Stored Programs in the Main Menu. Select the
required process and press Start.
2. Press Options to enter specific data. The following
describes the options Table 4.
Table 4 Stored programs options
Options Description
More For further Options
Save icon
Depending on whether Instrument Setup > Data Log Setup > Auto Store: On or Off is selected,
the Save icon either calls up stored data or performs a manual save procedure.
% Trans/Conc/Abs Switches from % transmittance to concentration or absorbance in reading mode.
Send Data icon
To send data to a printer, network drive, computer or USB memory stick (USB type A or Ethernet
port)
Timer icon
This functions as a stopwatch. It helps to make sure that the steps of an analysis are correctly
timed (e. g. reaction times, wait times, etc., can be exactly specified). When the specified time has
elapsed, a sound is emitted. The use of the timer has no influence on the reading program.
To Next Page
Loading...
