42
Standard programs
The target site can be defined by IP address or a server name.
12. Press IP-Address and enter the IP address or select Server
Name and enter the server name.
13. Press Data Folder and enter the target folder name.
Note: A folder with the selected name must exist on the target
system. Additionally, the folder must be shared with the operator,
using the corresponding password.
14. Press OK to confirm the entry.
User and password must be identical to the settings on the
target system.
15. Tap User and enter the user name.
16. Confirm the entry with OK.
17. Tap Password and enter the password.
18. Confirm the entries with OK.
19. Select Factory Default to set the network settings back to the
default settings.
To Next Page
Loading...
