35
4. Maintenance
4-1. Performance check by user
Perform the following performance checks at least once a year:
(1) Make sure if there is no damage and/or crack on the main unit and probe.
(2) Shake the main unit and make sure if there are no sounds inside from internal
components coming out.
(3) Turn the unit on and make sure if the LCD displays normally.
4-2. Cleaning
Probe
Remove the Doppler gel from the probe head after use.
Clean the probe using damp cloth and then wipe with a soft dry cloth, but take great care
that any water may not penetrate into the probe.
If using disinfectant, consult in advance with the manufacturer.
Main unit
To clean the main unit, use a damp cloth and then wipe with a soft dry cloth, but take
great care that any water may not penetrate into the unit.
Check the unit by maintenance procedures mentioned in "§ 4-1.Performance check by
user" before using the unit.
4-3. Warranty
Guarantee period: *: Frequency
Main unit
Two(2) years
BT*M05S8C(A), BF8M15S8A, BP*M05S8A, VRP-*,
LRP-*, FDP-08, ACP-08*¹, BDP-*
One(1) year
CRP-*H, NRP-*H Six(6) months
Probe
NRP-*HF Three(3) months
The guarantee period is after the date of purchase when used under normal condition. In
the event of any trouble during the warranty period, please contact the dealer from who
To Next Page
Loading...
