The IP adress will show here, as soon
as you connect your coviva controller
via LAN to a router (DHCP)
The status LED of your coviva
controller will turn on when a
compliant wifi extension is installed.
App version {{version}}
Copyright Hager Group 2015
All rights reserved
The IP adress will show here, as soon
as you connect your coviva controller
via LAN to a router (DHCP)
The status LED of your coviva
controller will turn on when a
compliant wifi extension is installed.
App version {{version}}
Copyright Hager Group 2015
All rights reserved
Activate the Hotspot mode if want
your coviva controller to open up its
own Wifi network.
Network
The IP adress will show here, as soon
as you connect your coviva controller
via LAN to a router (DHCP)
My account
Installer
All users
The status LED of your coviva
controller will turn on when a
compliant wifi extension is installed.
Settings
IP adress 192.168.178.23
Wifi
coviva
App version {{version}}
Copyright Hager Group 2015
All rights reserved
Q
W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
space return.?123
The password has to be at least 8
characters long.
Figure 10: Congure separate hotspot via WLAN
Create a new project (Figure 11)
The (mobile) end device is online.
Open the coviva app
.
Switch with
to login as an installer.
Enter e-mail address and password of the myHager account and log in with Login Login
(Figure 11).
The access data is validated online against the myHager account. A message conrms the
successful Login.