Remove device
Remove KNX device
1. Start removing your device
2. Now you have to press the
device pairing button. So keep your
device handy
Wall light living...
Ceiling light livi...
my devices
my groups
my covigrams
Off
Off
Living
All off
Scene TV
Wall light living ro...
Ceiling light living
Figure 18: Remove device
Combine devices into groups (Figure 19)
Devices can be combined into groups for easy navigation. In this way, all devices can be
grouped, for example, room by room or per oor.
To do this, press the green
button.
A context menu for selecting whether a group or zone should be added if thermostats are
installed, is displayed.
Select Add group.
A list with all devices is displayed under a new Group. The title line under
is activated.
Give the group a name via the keypad.
The desired devices are added by activating the relevant checkbox of this group.
Assign the devices to this group with Save or discard via
.
The group is displayed in the main menu.
To Next Page
Loading...