Edit/remove user
The saved data is displayed via
next to a user.
Then carry out the following actions as required:
– A new password can be assigned with Change password, which must be conrmed with
Save or discarded via Back.
– All rights are withdrawn from this user via the Delete User button.
The user proles for the installer and administrator cannot be removed. The password for
them can only be changed via myHager account (see myHager account).
If other user data was entered incorrectly or must be changed, for example, a new e-mail
address should be entered, the user must rst be deleted via Delete User and created again
with the correct data.
Change settings (Figure 29)
Basic changes in the app can be implemented and some information can be viewed under the
settings.
Call up the page for settings under
via .
Possible settings or further information are indicated by
in the right margin of the corre-
sponding line. If such a line is selected, a new page opens with the corresponding setting
options (see Table 3).
Conrm any changes to the settings with Save, discard via
or return to the previous page
without saving via .
Finally, exit the settings via
.
To Next Page
Loading...