hager TKP100A - The Project Process; 1 Preparations; Myhager Account; Role Concept

Page 7/45
installer_07-2017
The Project Process
Prepare the smartbox in three steps for project handover to the customer:
myHager
coviva
i
my devices
my groups
my covigrams
my favorites
1 Preparations
2 Installation 3 Conguration 4 Project handover
1 Preparations
Role concept
User proles with different access rights must be managed in the smartbox:
User prole Access rights myHager ac-
count
Example
Installer during the project
- unlimited rights
after the handover, if required:
- Remote access after release
by the administrator
Required Installation engi-
neer, planner
Administrator for one user per smartbox:
- Conguration rights for
adding/removing devices
- Administration of all users
Required Home
administrator
User name normal rights for adapting and
operating the system
not required Family members,
fellow occupants
Table 1: User proles
Detailed information on the access rights per user prole can be found in an overview table
in the appendix.
myHager account
In order to create a project with the smartbox, a successful registration Table 1 under hager.
com is necessary. Registration only has to be carried out once prior to the rst coviva project.
The same myHager account has to be used for all further coviva projects.
 Go to the hager.com website and click on register now.
Or:
 Scan the QR code with an appropriate app, switch to the coviva
hager.com/coviva
homepage and select Registration.
 Fill out the personal data, agree to the use of personal data and congure
account with Send.
An e-mail with a conrmation link for activating the myHager account will
be sent to you (Figure 4).
 Click the Complete registration button in the
e-mail to activate the account
Later, you can also view completed coviva projects via the account (Figure 5).
hager.com
coviva smartbox