hager TKP100A - Edit;Remove Group

Page 23/45
installer_07-2017
Edit/remove group (Figure 20)
The groups can be edited in the app or removed again at any time.
 Press
i
in the top right corner of the main menu.
All elements in the main menu are switched to edit mode.
 Select the group to be edited via the
i
on the corresponding group.
Details about the group, such as the switching state and integrated devices, are displayed.
 Then carry out the following actions as required:
– Change the name of the group by activating the name line and making an entry via the
keypad.
– Add Devices to this group or remove it from this via the displayed checkboxes.
– Delete Group from the project .
The group is no longer displayed in the main menu.
 With the exception of Delete, nally conrm all edit operations with Save or discard
via Back .
The display returns to the main menu and displays the changes.
 Press
in the top right corner of the main menu to exit the edit mode.
hager.com
coviva smartbox