60
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
1
2
1 1 1
(2) Reading method of inspection code
Press the check button, the number (centralized control address) of indoor unit group with inspection codewill be displayed on the display part unit group number, and the fault information of 2 inspection codes x 16sets will be displayed on the display part of "setting temperature".
<7-segment display>
Decimal
system
<Check>
Unit group
Number of unitgroup
(Centralized control address)
Checkout
Inspection codefirst checked out
Inspection codelast checked out
(For example) The outdoor unit serial communication of No.1 unit group first has fault, then the room
temperature sensor of No. 1 unit has fault and the high pressure switch of No.16 unit
group starts action.
Unit
group
Checkout
(For example) When there is not any inspection code
Unit
group
Checkout
Unit
group
Checkout
Hexadecimalsystem
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
