5
2. GENERAL INSTRUCTIONS
This manual covers the Hale Flex Series of single stage booster pumps and provides basic infor-
mation on Hale AP, CBP, MBP, or RSD Flex Series of booster pumps when local procedures do NOT
exist. Basics of operation, installation verification, and maintenance are covered.
Additional information is available in FSG–MNL–00184, Technical Manual For Hale Single Stage
Booster Pumps. This manual and additional information such as pump curves and rating charts can
be found on the flash drive provided with the pump or on the Hale website (www.haleproducts.com).
ALWAYS FOLLOW LOCAL GUIDELINES FROM THE AHJ AND THE APPARATUS MANUFAC-
TURER.
2.1. Overview
This manual ONLY covers the Flex Series of single stage booster pumps.
2.2. Pump Specifications and Numbering
Each pump has a unique serial number that can be found in multiple locations. Model numbers de-
fine major pump features.
For detailed booster pump specifications, refer to the Hale Products website (www.hale prod-
ucts.com). Hale Products Inc. policy is one of continuous development. Hale therefore reserves the
right to amend specifications without notice or obligation.
2.2.1 Optional Pump Panel Identification Plates
Figure 1 shows the Hale pump panel identification plate. This placard has the same data as the iden-
tification plate on the pump. The placard is optional and shipped loose with the pump when selected.
Figure 1. Pump Panel Identification Plate (Placard)
To Next Page
Loading...
