HALE FLEX Series - 3 Transport and Storage; Shipping, Movement, and Installation Preparations; Pump Gearbox Shipped Without Fluid; Storage

7
3. TRANSPORT AND STORAGE
Ship, move, and store a Hale Flex booster pump according to the information herein.
3.1. Shipping, Movement, And Installation Preparations
Hale Flex booster pumps use packaging suitable for shipping and indoor storage. Never stack pumps
on top of one another.
Upon receipt, inspect the packaging and pump. If any damage has occurred, take clear detailed pic-
tures, and file a claim with the carrier. Contact Hale Customer Support immediately (hale customer-
service@idexcorp.com).
3.2. Pump Gearbox Shipped Without Fluid
HALE FLEX SERIES PUMPS ARE SHIPPED WITHOUT GEAR OIL. FILL THE GEARBOX WITH
MANUAL TRANSMISSION FLUID SPECIFIED IN TABLE 5 BEFORE OPERATING.
Fill the gearbox to the proper level with the fluid listed in paragraph 7.4.4.1.1, Recommended Gear-
box Lubricants. See paragraph 7.4.4.1, for instructions to fill the gearbox with fluid.
3.3. Storage
Hale Flex Series pumps should be stored indoors in a protected environment before installation. If
the pump needs to be stored for more than six months, see Hale Service Bulletin SB150 on the Hale
website.