Hama DIT2010 User Manual

11
Navigation and controls
• Select among menu items by turning [tuning].
• Conrm the selection by pressing [tuning].
This procedure is indicated in these operating instructions
by the following symbols:
selection (navigate) conrmation (enter)
Some features can be
accessed by means
of shortcut buttons.
Pressing shortcut buttons
is indicated here by this
symbol.
After pressing a shortcut button, navigate amongst the
menu items using [tuning].
Volume adjustment / mute
• You can turn the volume up (right) or down (left) by
turning [volume] accordingly.
• Press [
] on the remote control to mute the radio.
• Press [ ], on the remote control again to reset the
volume at the level you set before mute the radio.
Entering passwords, search terms, and so on
• Select each successive letter and digit by turning
[tuning] and conrm each selection by pressing
[tuning].
• To make corrections, select BKSP and conrm. The last
input made is deleted.
• To cancel input, select CANCEL and conrm.
• Once your input is complete, select OK and conrm to
nish.
• Press [info] to jump directly to the BKSP/ OK/ CANCEL
elds.
Additional information
Press [info] to display context-dependent additional
information. The information shown depends on the
operating mode as well as the current selection of radio
station, music le, etc.
[info]
• Description
Indicates the radio station, the current program,
contents, subjects, etc.
• Program genre/country
Indicates the genre (music style) and the country or
region of the station.
• Reliability
• Bit-Rate
The currently received digital bit rate of the received
station is displayed.
• Codec
Species the encoding scheme used to digitise the data
or signal (such as MP3 or WMA).
• Sampling rate
Species the sampling rate, or the frequency with which
the audio signal is polled (Sampling-/ Samplerate), in a
certain period of time.
• Signal strength
The signal strength of the received station is displayed
via a bar and its length.
• Today’s date
• Artist
• Album
• Folder
• Path
Species the directory path at which the le currently
being played back is saved.
Switching on/off / Standby
• Press [on /off] to switch the radio on or off (Standby).
• To completely switch off the device, disconnect it from
the power supply.

Hama DIT2010 Specifications

General

Brand	Hama
Model	DIT2010
Category	Radio
Language	English