Microlab
®
STAR User Manual
Page 152 of 225 610766/02
The pipetting is then performed by the SMART Step pipette. The important sequence
settings are shown in the next screen:
The aspiration sequence (the hits) is controlling here and not reloadable. The target
sequence is not reloadable either. The rest of the settings is very similar to the
previous example “OnePlateToPlatePipette”.
Finally, the unloading takes place in the usual way.
You will find additional examples, involving, for instance, the reading of a comma-
separated file in MTP map format (HitPick_CSV), in your demo methods directory.
To Next Page
