Hamilton Microlab STAR - Page 92

Microlab
®
STAR User Manual
Page 92 of 225 610766/02
Once you close this dialog with OK, the mathematical library functions (for example) are
available under their own bar and can be invoked like standard commands. In this example,
the following functions are linked and now made available within the method:
Additional functions available include the generation of a Microlab AT-like barcode file, the
execution of a Gemini worklist, the formatting of an ML-STAR barcode file, and the deletion
of an ML-STAR barcode file. Refer to the online help for more information on these
functions.
The libraries available include:
Library 7KLVOLEUDU\IXQFWLRQKDQGOHV
HSLArrLib array variables
HSLDevLib devices
HSLDlgLib dialogs
HSLErrLib errors
HSLFilLib files
HSLMthLib mathematical functions
HSLSeqLib sequences
HSLStrLib string variables
HSLTimLib timer
HSLTrcLib trace files
Pressure based aspiration monitoring off
Pressure based aspiration monitoring on
Capacitance based clot detection off
Capacitance based clot detection on (the clot heigth must be specified in the
liquid class)
Measure container volume with n channels (auto-increment 1=yes, 0=no), if
pattern is reduced (e.g. 11000111), all sequence positions are used
Get container volume of i
th
channel in ml, as measured in previous „Measure
Container Volume“ Step.
Set threshold for pressure based clot detection.