13 Image Reverse
In application, we will encounter the mirror or vertical flip image, as shown in the following figure.
When the barcode in reverse, can be set up by scanning the corresponding code into mirror reverse mode.
Enter Mirror Reverse Mode
* Exit Mirror Reverse Mode
Note: In Mirror Reverse Mode, only can identify the mirror flip the bar code, if you need to identify normal barcode
or set code, please exit mirror reverse mode.
14 Reading the Information of the Version
In order to make main engine read apace for the information of the version, please read the code as below to
confirm.
Reading the Information of
the Version
To Next Page
Loading...
