Hamlet HBCS2D100W User Manual

CODE ID of changing
DATA MATRIX
CODE ID of changing
Limited PDF417
17 Ending Character
In order to let the host can quickly distinguish the decoding result, can open this function.
Read the "Ending character" to open this function, if read successfully, corresponding ending character is added by
reading module after decoding data.
Closing ending character
Adding ending character
Adding ending character
TAB
Adding ending character
CRLF
18 Interception of Data Segments
This function can be enabled when the user only needs to output a part of the decoding information.
We will decode the information [Data] into three parts:
[Start] [Center] [End]
The characters of the [Start] and [End] can be controlled by scanning setting code.
The user can select the output information of the corresponding location by scanning the following setting code.
* Transfer the entire Data
segments
Only transfer the [Start]
segments

Hamlet HBCS2D100W Specifications

General

Brand	Hamlet
Model	HBCS2D100W
Category	Barcode Reader
Language	English