When working on or with the machine, the following
must be strictly observed:
Sturdy, tight-fitting clothing (tear-resistant, no wide sleeves).
When working on or with the machine, the following must always be worn by personnel:
That protects the feet from heavy falling objects and prevents sliding on slippery floors.
To protect against loss of hearing.
The machine has undergone a hazards analysis. The
design and construction of the machine are based on the
results of this analysis and correspond to state-of-the-art
technology.
The machine is considered operationally safe when used
properly.
Nevertheless, there are some residual risks that must be
considered.
The machine runs with high electrical voltage.
Before carrying out any maintenance, cleaning and
repair work, switch off the machine and secure it
against being accidentally switched on again.
When carrying out any work on the electrical equip-
ment, ensure that the voltage supply is completely cut off.
Do not remove any safety devices or alter them to put
them out of commission.
Safety
• Hearing damage as a result of high noise levels.
• Health impairments due to the inhalation of airborne
particles, especially when working with beech and
oak wood.
To Next Page
Loading...
