Setup and installation
Before assembling and installing the machine, check to
make sure it is complete and in good condition.
• Ensure that there is sufficient space for working
around the machine. Ensure there is ample distance
between the machine and other solid contructions
such as a wall or other machines.
• Keep the work area orderly and clean. Components
and tools that are not fixed or have been left lying
around may be the cause of accidents!
• Install the safety equipment according to the instruc-
tions and check that it functions properly.
• Operation/room temperature: +10° to +40° C.
• Ensure that the work surface is sufficiently stable and
has the proper load-bearing capacity.
• Provide sufficient light at the workstation.
• Ensure there is sufficient clearance to or shield neigh-
bouring workstations.
• Risk of injury! Keep machines, tools and accessories
etc. out of the reach of children.
• Vacuum hoses and electrical wires should be layed
in such a way as to avoid tripping over them.
17
To Next Page
Loading...
