Hammer N4400 - 9 Faults; 9.1 Safety instructions; 9.2 What to do in case of a fault; 9.3 What to do after rectifying the fault

Faults









 In the event of a breakdown which creates danger
for either personell or equipment the machine should
be stopped immediately using the emergency stop.
 Also disconnect machine from the mains and secure
it from being started up.
 Inform those responsible of faults immediately.
 Type and extent of fault should be determined by an
authorised professional, as well as the cause and
repair.


• The fault and its cause are professionally repaired.
• All safety measures have been installed according to
regulations and are faultless.
• People are not located in the danger area of the
machine.

29