57
Replace gear oil
Park the truck at level ground.
Wipe off oil add and drain plug.
Unscrew oil add plug 46 .
Place an appropriate container under oil
drain plug(47), unscrew oil drain plug(47),
and drain the oil to the container.
After oil in the reduction box drains,
re-tighten the drain plug 47 .
Add appointed gear oil GL-5 85W/90
order to add oil easily,
funnel and tube. When oil overflows from the
oil filler, it means oil is enough.
Re-
tighten oil add plug(46), and clean the
residual oil on the reduction box surface.
WARNING
Handle the exhaust oil according to
relevant rules of the sta
dump at will.
46
47
46
To Next Page
Loading...
