60
8.6 Removing the hood
Procedure:
Park the truck securely.
Open the arm guard(4).Only for the stand on type
Put down the folding pedal (7).Only for the stand on type
Undo the four groups of bolts(51)/ (52)on the panel(5)with a wrench.
Lift the hood(5),remove it from the truck and place it securely next to the truck.
The panel is now disasdembled.
Instead of the installation sequence and disassembly sequence.
WARNING
When hood was removed, Prohibited operating forklift .
When
hood was removed, before the repair, must to discharge (such as controller)
energy storage components.
5
5
4
7
51
51
51
52
To Next Page
Loading...
