30
4.4 Battery charging
4.4.1 Lead-acid battery charging
Drive the truck to appointed charging place, park the truck and render if safe.
Open the battery cover 14 .
Remove the battery plug from the truck socket 38 .
Open the fill cap of each battery cell.
Connect the charging plug (39) to battery plug (38).
Start the charging procedure according to the charger operation instructions.
End charging according to the charger operation instructions after the battery fully charged.
Remove the battery plug (38) from the charger.
Close the fill cap of each battery cell.
Connect the battery plug 38 with truck socket and cover the battery hood(14).
After charging, the truck can be used.
39
14
38
WARNING
Please charge in the well-ventilated and appointed site.
Before charging, please
examine wire and electrical outlet for damage, otherwise do
not charge.
Open the hood and storage battery lid to release the explosive gas when charging.
Never place metal object on the battery.
In the progress of charging, do not pull out power switch and battery plug, otherwise
it may damage plug and electrical units. Generally press down the stopping button
firstly, and then take out the plug.
To Next Page
Loading...
