24
3) Front/rear wheel and balance wheel check
Check the wheel and see whether there
is any crazed, damaged, or abnormal
wearing. Check the wheel fasteners for
looseness.And inspect whether there is
rope on the wheel.
4) Check front fork and linkage mechanism
Check the fork and linkage mechanism, see whether bending or crazed. Whether appear
interfere when move, movement point wear whether severe.
5) Hydraulic oil check
Loosen the hydraulic oil filler cap,
pull out dipstick, and check if the oil
level within the scales. Add oil
when insufficient.
6) Battery check
– Check the battery cover board.
See whether the battery fixed reliably.
– Check the terminal for loose or
damage. Otherwise adjust or replace
7) Instrument display check
Refer to description of handle control box.
8) Lifting and lowering button
Press the lifting button and check the fork lifting condition. Press the lowering button, check the
fork lowering condition. Check if the lifting system has abnormal sound.
9) Forward and reverse running condition
Tilt the handle to some degree, gradually press the accelerator button to the outside of the
body with thumb, and inspect the forward running condition; gradually press the accelerator
button to the inside of the body with thumb, and inspect the reverse running 55 condition.
10) Brake system
When the stacker run forward or backward, push the handle to vertical position or press to level
position to check the brake condition.
To Next Page
Loading...
