23
Emergency reverse button[8]
- This switch is at the head of control lever, once
touch this button, the stacker moves forward. It is
used to protect people from being clamped by the
control handle.
- This switch is also called belly switch.
Travel switch[9]
●
This button is located on both sides of the
control box head, with one linkage on the left
and one linkage on the right. It is used to control
the direction and speed of operation.
- The stacker is running towards the fork side
- Press the control box down with your hand.
- Thumb the direction and speed control button
from one side of the body to the other
- Gradually rotate outwards.
- The stacker runs towards the fork side.
● The stacker is running towards the side of
the handle (or pedal)
– Press down the control box. Thumb to control
direction and speed.
The button gradually rotates towards the side of
the body.
- The stacker runs towards the side of the
handle (or pedal).
The direction and speed control button will
automatically return to its original position when
the finger is released, and the stacker will brake.
Therefore, the stacker needs to continue running
while the finger is not released.
In order for the safety stacker operation and keep the stacker in good condition, before starting
the stacker, you must check it carefully.
1) Oil leak and liquid leak checking
Park the stacker, and check the stacker for hydraulic oil, gear oil or electrolyte leak.
2) Fork check
Check the fork and see whether bending or crazed.
To Next Page
Loading...
