39
– The normal operating oil temperature ≤70℃。
– The drive unit is a maintenance free drive device. If lubricating grease needs to be added,
the drive unit must be removed and added from the top.
– The injection amount of lubricating grease (Shell Alvania R3 Lubricant) is 2/5-2/3 of the
inner cavity.
1.4 Fault and troubleshooting
Abnormal gear
noise during
driving
Excessive gear clearance Adjustment
Lack of lubricating grease Supplement
Excessive gear wear Replace
Abnormal noise
during steering
The rolling bearing of the turntable
is damaged
Replace
Insufficient lubrication of the rotary
table rolling bearing
Replenish lubricating
grease
Poor or
ineffective
braking
Loose or damaged micro-switch Tighten or replace
Excessive brake clearance Adjustment
Excessive brake disc wear Replace
Brake loose Fastening
Line damage Repair
Excessive
vehicle
Damaged shock absorber assembly Replace
1.5 Drive motor
Precautions for motor use
– The surrounding area of the motor should be kept clean and dry, and no other objects
should be placed inside or outside.
To Next Page
Loading...
