20
E
N
G
L
I
S
H
WARRANTY
The manufacturer warrants the product manufactured by it, when properly installed, operated, applied, and
maintained in accordance with procedures and recommendations outlined in manufacturer’s instruction
manuals, to be free from defects in material or workmanship for a period of one (1) year from the date of
shipment to the buyer by the manufacturer or manufacturer’s authorized distributor, or eighteen months
from the date of shipment from the factory, whichever occurs first, provided such defect is discovered and
brought to the manufacturer’s attention within the aforesaid warranty period. The manufacturer will repair or
replace any product or part determined to be defective by the manufacturer within the warranty period,
provided such defect occurred in normal service and not as a result of misuse, abuse, neglect or accident.
The warranty covers parts and labor for the warranty period. Repair or replacement shall be made at the
factory or the installation site, at the sole option of the manufacturer. Any service performed on the product
by anyone other than the manufacturer must first be authorized by the manufacturer. Normal maintenance
items requiring routine replacement are not warranted. Unauthorized service voids the warranty and any
resulting charge or subsequent claim will not be paid. Products repaired or replaced under warranty shall be
warranted for the unexpired portion of the warranty applying to the original product. The foregoing is the
exclusive remedy of any buyer of the manufacturer’s product. The maximum damages liability of the manufac-
turer is the original purchase price of the product or part.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, OR
STATUTORY, AND IS EXPRESSED IN LIEU OF THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE MANUFACTURER SHALL NOT BE LIABLE FOR LOSS OR
DAMAGE BY REASON OF STRICT LIABILITY IN TORT OR ITS NEGLIGENCE IN WHATEVER MANNER INCLUDING DESIGN,
MANUFACTURE OR INSPECTION OF THE EQUIPMENT OR ITS FAILURE TO DISCOVER, REPORT, REPAIR, OR MODIFY
LATENT DEFECTS INHERENT THEREIN. THE MANUFACTURER, HIS REPRESENTATIVE OR DISTRIBUTOR SHALL NOT BE
LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER INCIDENTAL OR CONSEQUENTIAL COSTS, EXPENSES, OR
DAMAGES INCURRED BY THE BUYER, WHETHER ARISING FROM BREACH OF WARRANTY, NEGLIGENCE OR STRICT
LIABILITY IN TORT.
The manufacturer does not warrant any product, part, material, component, or accessory
manufactured by others and sold or supplied in connection with the sale of manufacturer’s products.
01/01/93
AUTHORIZATION FROM THE SERVICE DEPARTMENT IS NECESSARY BEFORE MATERIAL IS
RETURNED TO THE FACTORY OR IN-WARRANTY REPAIRS ARE MADE.
SERVICE DEPARTMENT: (724) 746-1100
SPX Air Treatment
1000 Philadelphia Street
Canonsburg, PA 15317-1700 U.S.A.
Phone: 724-745-1555
•
Fax: 724-745-6040
Email: hankison.service
@
airtreatment.spx.com
www.hankisonintl.com
© 2006 SPX Corporation. All rights reserved. 3/03 Inv# 000 000
To Next Page
Loading...
Need help?
General
