Hanna Instruments HI 903 - Page 17

17
QUICK START GUIDE
Standby Duration: 720 minutes
Imposed Current: 20 uA
Minimum Dose: 0.5000 uL
Maximum Dose: 30.0000 uL
Timed Increment: 1 second
End Point Value: 180.0 mV
Signal Averaging: 3 Readings
Flow Rate: 10.0 mL/min
Termination Parameters:
Maximum Duration: 3600 sec
Maximum Titrant Volume: 20.0000 mL
Term. Criterion: mV End Point
mV End Point: 4 sec
Result Unit: %
Nr Volume[ml] mV Time
0 0.0000 403.6 00:00:00
1 0.0000 403.5 00:00:01
2 0.0028 403.1 00:00:03
3 0.0078 402.3 00:00:05
4 0.0128 402.6 00:00:06
5 0.0178 403.0 00:00:08
6 0.0228 402.5 00:00:09
7 0.0278 402.4 00:00:11
8 0.0328 402.7 00:00:12
9 0.0378 402.5 00:00:14
10 0.0428 402.9 00:00:16
.
.
.
256 0.9904 169.7 00:06:45
257 0.9904 177.4 00:06:47
258 0.9904 173.7 00:06:48
259 0.9904 171.1 00:06:50
260 0.9904 173.4 00:06:52
261 0.9904 181.1 00:06:53
262 0.9904 175.5 00:06:55
263 0.9904 178.2 00:06:56
264 0.9904 177.6 00:06:58
Titration Results
Method Name: Moisture in Oil
Time & Date: 12:00 Jan 01, 2011
Sample Size: 0.5291 g
Titrant Conc.: 2.0000 mg/mL
Drift Value: 1.0 ug/min
End Point Volume: 0.9904 mL
Result: 0.3730 %
Titration Duration: 06:58 [mm:ss]
Estimated Cell Volume: 50.8 mL
Titration went to Completion
Operator Name: Any text
Analyst Signature: ____________________