31
SYSTEM SETUP
METER PASSWORD
The meter password protects against unauthorized configuration changes and data loss. When
enabled, many settings and functions cannot be modified or viewed without entering the correct
password. Once entered, the password will not be required until the meter is turned ON again.
To enable the password proceed as follows:
1. Highlight “Meter Password” and press Modify.
2. Enter the desired password (of 6 digits) in the text box and press Accept. While typing, the
characters are masked with a “*”.
3. Reenter the password. Press Accept to confirm.
4. The meter returns to the “Meter Setup” menu. The checkbox corresponding to the meter
password is checked.
To disable the password protection, highlight “Meter Password” and press Modify, enter the password
and then press Disable. “No password” appears in the text box. Press Accept to confirm.
METER ID
Option: up to 14 characters
This option is used to set the instrument’s ID (identification number). Press the Modify key to access
the meter ID screen.
Use the alphanumeric keypad to enter the meter ID. Press the Accept key to confirm the value or ESC
to return to the Setup menu without saving.
LANGUAGE
Press the Modify key to change the Language. Use the / keys to select the desired language.
Please contact your local Hanna Instruments Office for available languages.
To Next Page
Loading...
