30
SYSTEM SETUP
ERROR BEEP
Option: Enable or Disable
If enabled, an acoustic signal sounds every time an incorrect key is pressed, or when an error occurs.
A checked box indicates this function has been enabled.
DECIMAL SEPARATOR
Option: Comma (,) or Period (.)
Press the functional key to select the desired decimal separator.
The decimal separator is used on the measurement screen and CSV files.
LCD CONTRAST
Option: 0 to 15
Press Modify key to change the display’s contrast.
Use the / keys to change the contrast level. Press Accept to save the new value.
LCD BACKLIGHT INTENSITY
Option: 0 to 10
Press the Modify key to access the backlight intensity.
Use the / keys to change the level. Press Accept to save the new value.
To Next Page
Loading...
