35
Press the EDIT key to modify the absorbance for the first standard.
Use the or key to highlight the digit to be modified. Press the or keys to set the desired value. Press
CFM to confirm the value or CLR to return to the method settings menu without saving. To set a negative abs value highlight the first
digit and use or to select designed value.
Press the CFM key to save the value.
Press the DONE key to save and exit the calibration or the MORE key to add additional points.
This procedure can be repeated until 10 calibration points have been added.
Edit concentration point Edit Abs point
.
.
.
.
.
.
SETUP
To Next Page
Loading...
Need help?
General
