Oscilloscope Functions
USER’S MANUAL 39
3.8 Save/Load
Save
Click “File” in main menu to save waveform data, setups and image.
1. Save Data
Save waveform data as a .txt, .csv, .xls, .doc or .wfm file.
2. Save Setup
Save the current oscilloscope setup to .set file.
3. Save Image
Save the software display window as a .bmp or .jpg file.
Load
Click “File” in main menu to recall saved waveform and setup.
1. Load Data
Load the waveform that had saved as a .wfm or .rfc file.
2. Load Setup
Load the instrument that had saved.
To Next Page
Loading...
